![[Professionals only] Plaxpot plasma device](https://channelpropen.com/wp-content/uploads/2025/04/Plaxpot.png)
![[Professionals only] Plaxpot plasma device](https://channelpropen.com/wp-content/uploads/2025/04/plaxpot_1.png)
Description
[Professionals only] Plaxpot plasma device
PLAXPOT is the compound word of ‘plasma’ and ‘spot.’
It is a patented plasma device for specializing in non-surgical and non-invasive eyelid beauty treatment, and is a medical plasma device that provides powerful and concentrated effects to the areas where treatments are needed.
What is plasma?
Plasma naturally induces skin peeling by sterilizing the skin and removing various contaminants.
In addition, plasma energy stimulates the fibroblasts so that collagen is generated, and skin is regenerated, resulting in elastic skin and wrinkle treatment.
Features
Ion plasma, PLAXPOT
PLAXPOT does not induce ionized gases in the air to conduct heat but concentrates heat only in the problematic area, applying energy to generate plasma. Hence, it does not affect the deep skin layers, yet contracts skin tissues and dramatically reduces potential and continuous skin damage, while the ions generated from the plasma stimulate the dermis to produce collagen, resulting in skin regeneration and reduction of skin pigmentation.
Arc plasma – Sublimation, Regeneration of fibroblasts and skin tightening
PLAXPOT’s Arc Plasma is an innovative treatment method that eradicates excessive tissues of the skin, which is the cause of wrinkles and drooping skin, through skin tightening.
An arc plasma of a minus pole is generated at the end of the tip about 1mm away from the skin surface, and the skin surface is sublimated into a nanometer-sized dot shape.
With the plasma sublimation process, the generated spots reduce the surrounding skin to the smallest size, and if one uses the Reduction Grid method where many spots are applied together, compared to other devices which use heat, wider and thinner treatment traces remain, while the skin tissues are contracted.
With this effect, one does not need to depend on excessive heat, and with a non-invasive method, drooping skin tissues are sublimated.
The patented plasma technology of PLAXPOT
Existing plasma devices directly apply high-voltage to the narrow and deep, invasive areas of the skin, raising the possibility of burns and scars, and during treatment, it is difficult to apply the same amount energy of plasma, so the skin treatment is not even.
PLAXPOT can output plasma by insulating a high voltage through a dielectric, and it can obtain a power proportional to the electrode area by controlling the generated area of the electrode rather than controlling the voltage value itself, thereby providing uniform and safe procedures.
Common high-voltage discharge type (Other company’s products)
- Through the high-voltage generation part, the generated high-voltage is sent directly to the skin
- Energy is sent to a narrow and deep area, so that after treatment, there are risks of pigmentation and burns
- The area of application is quite restricted because only continuous output in the continuous mode is possible
PLAXPOT’s plasma types
- High voltage is not directly sent to the skin through high-voltage generation part, but through a dielectric material, the high-voltage is insulated, and plasma generated, and plasma is collected before being sent to the skin
- The sent area is relatively large, and not deep so that even delivery is possible to reduce the possibility of pigmentation and burns
- A separate pulse-control is installed in the device so that different pulse modes can be generated, and because the energy delivery method can be set up in various formats, the device can replace CO2 laser equipment
Difference between PLAXPOT and common plasma pen method
RF common electric-discharge method
- The area of application is small and the insertion is deep
- The even treatment effect is hard to predict according to treated spot
- There are risks of burns
- There is high chance of scars remaining
The plasma method
- Compared to the common electric-discharge method, the skin surface applied is even
- There is little risk of burns
- The sublimation effect required of soft surgery is sufficiently carried out
Spec.
-
Plasma device PLAXPOT
- Model Name: GPX-2000
- Output frequency: 70kHz
- Output level: 3 stages (0.7W, 1.0W, 2.0W)
- Output mode: Continuous, Pulse
- Pulse mode frequency: 10, 20, 40, 100, 200Hz
- Size: 197 x 40 x 38mm
- Electronic product classification: Class 2
- Power: Embedded lithium-polymer battery 7.4V, 1000mAh
- Power recharger: Lithium polymer-specific 8.5V DC/500mAmax output, AC100~240V(50/60Hz) input
- Power consumption: Maximum 2W
- Display: 1.5 inch full-color OLED
Use Guide
Non-surgical blepharoplasty treatment (upper and lower eyelids)
- Skin tightening (treating chapped skin, upper arms, lifting drooping skin)
- Eradication of spots, warts, age spots, skin tags, spider nevus, whiteheads, sweat adenomas and other skin problems
- Treatment of acne remains and management of rubeosis
- Lifting of face, lips, neck and chest
- Removal of laugh lines and wrinkles around the lips
- Removal of scars
- Correcting nose and navel
- Reduction of the earlobes
- Management of the knees
